Renew Mimarlık · 10 / 100
Material, countertop and furniture problems
Materials sold under the same name may differ in terms of surface, thickness, edge and workmanship. The sample, manufacturer's technical sheet and written offer should be evaluated together.
Should I choose MDF or chipboard?
The material name alone does not determine the strength. Compare board class, edge protection, connection and usage area with the sample and technical data.
Do lacquered covers turn yellow over time?
Surface system, light exposure and maintenance affect the result. Request samples in light of manufacturer maintenance information and actual location.
If the cabinet doors are sagging, should the hinges be changed?
Door weight, hinge, connection screw and body surface should be examined together. Just replacing the hinge may not solve the problem if the source is the body.
If there is a stain on the kitchen counter, is the material faulty?
The type of stain, surface finish and cleaner used are important. Check the manufacturer's instructions; Consult the applicator before using harsh chemicals.
If there is a crack on the edge of the countertop, why?
Cutting detail, support, impact and assembly conditions should be examined. If the crack is progressing, do not load the surface and show it to the application team.
Even if the bathroom cabinet is moisture resistant, will it swell?
Yes; constant water contact and exposed edges can affect many boards. Do not just replace the material without addressing the source of leaks and vents.
How much maintenance does a wooden countertop require?
Frequency of maintenance depends on surface finish, water contact and manufacturer's instructions. Compare your usage habits with maintenance expectations before choosing.
Why are ceramic joints opening again and again?
It may be subsurface movement, application detail or water effect. Have the floor and joints inspected instead of just renewing the joint.
If the laminate flooring is swelling, is there water?
Water contact is possible; Moisture and expansion space in the subfloor can also be effective. Applying new coating without resolving the weld may cause the damage to reoccur.
What should be done if the selected sample and the incoming material are different?
Compare product code, batch and surface finish with written order. Document and clarify the difference with the supplier before installation.
Still need help?
These answers are general information. Safety and repair decisions require a qualified on-site assessment. Translations were prepared with automated assistance.